Bon, a y est, la migration est faite
J'ai maintenant un petit problème avec mon affichage en double écran qui ne veut plus fonctionner
je vous offre mon xorg.conf actuel :
# File generated by XFdrake (rev 230776)
Section "Extensions"
Option "Composite"
EndSection
# **********************************************************************
# Refer to the xorg.conf man page for details about the format of
# this file.
# **********************************************************************
Section "ServerFlags"
#DontZap # disable <Ctrl><Alt><BS> (server abort)
AllowMouseOpenFail # allows the server to start up even if the mouse does not work
#DontZoom # disable <Ctrl><Alt><KP_+>/<KP_-> (resolution switching)
EndSection
Section "Module"
Load "dbe" # Double-Buffering Extension
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
Load "glx" # 3D layer
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "compose:rwin"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/mouse"
EndSection
Section "InputDevice"
Identifier "Mouse2"
Driver "evdev"
Option "bustype" "0x0003"
Option "product" "0xc51a"
Option "relBits" "+0+1+2"
Option "HWheelRelativeAxisButtons" "7 6"
Option "vendor" "0x046d"
EndSection
Section "Monitor"
Identifier "monitor1"
VendorName "Plug'n Play"
ModelName "Philips 170C5"
HorizSync 30-82
VertRefresh 56-76
# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection
Section "Device"
Identifier "device1"
VendorName "nVidia Corporation"
BoardName "NVIDIA GeForce FX - GeForce 8800"
Driver "nvidia"
Option "DPMS"
Option "RenderAccel" "false"
Option "AddARGBGLXVisuals"
EndSection
Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultColorDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection
Subsection "Display"
Depth 15
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection
EndSection
Section "ServerLayout"
Identifier "layout1"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
InputDevice "Mouse2" "SendCoreEvents"
Screen "screen1"
EndSection
Ainsi que mon ancien fichier qui fonctionnait avec ma distrib en 64 bits :
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder26) Wed Apr 4 23:39:44 PDT 2007
# File generated by XFdrake (rev 142098)
# **********************************************************************
# Refer to the xorg.conf man page for details about the format of
# this file.
# **********************************************************************
Section "ServerLayout"
Identifier "layout1"
Screen 0 "Screen0" 1280 0
Screen 1 "Screen1" LeftOf "Screen0"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
InputDevice "Mouse2" "SendCoreEvents"
EndSection
Section "Files"
# font server independent of the X server to render fonts.
# minimal fonts to allow X to run without xfs
ModulePath "/usr/lib64/xorg/modules/extensions/nvidia97xx"
ModulePath "/usr/lib64/xorg/modules"
FontPath "unix/:-1"
FontPath "/usr/share/fonts/misc:unscaled"
EndSection
Section "Module"
Load "dbe" # Double-Buffering Extension
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
Load "glx" # 3D layer
EndSection
Section "ServerFlags"
#DontZap # disable <Crtl><Alt><BS> (server abort)
#DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
# allows the server to start up even if the mouse does not work
Option "allowmouseopenfail"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "compose:rwin"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/mouse"
EndSection
Section "InputDevice"
Identifier "Mouse2"
Driver "evdev"
Option "product" "0xc51a"
Option "HWheelRelativeAxisButtons" "7 6"
Option "vendor" "0x046d"
EndSection
Section "Monitor"
# Monitor preferred modeline (60.0 Hz vsync, 64.0 kHz hsync, ratio 5/4)
Identifier "monitor1"
VendorName "Unknown"
ModelName "Philips 170C5"
HorizSync 30.0 - 82.0
VertRefresh 56.0 - 76.0
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "768x576" 50.0 768 832 846 1000 576 590 595 630
ModeLine "768x576" 63.0 768 800 960 1024 576 578 590 616
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Philips 170C5"
HorizSync 30.0 - 82.0
VertRefresh 56.0 - 76.0
EndSection
Section "Device"
Identifier "device1"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NVIDIA GeForce FX - GeForce 7950"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce FX 5900XT"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Videocard1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce FX 5900XT"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "screen1"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 24
Option "DPMS"
Option "AddARGBGLXVisuals"
Option "TwinView" "0"
Option "metamodes" "CRT-1: 1280x1024 +0+0"
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "CRT-0: 1280x1024 +0+0; CRT-0: 1152x864 +0+0; CRT-0: 1024x768 +0+0; CRT-0: 832x624 +0+0; CRT-0: 800x600 +0+0; CRT-0: 640x480 +0+0; CRT-0: 320x240 +0+0"
EndSection
Section "Extensions"
Option "Composite"
EndSection
J'ai bien sûr essayé de rajouter à la main les screen0 et device0, mais dès que je les ajoute, mon serveur X ne démarre plus. (dernier détail, comment éditer un fichier conf en ligne de commande, parceque pour l'instant, je passe mon temps à botter sur un live CD pour remettre mon serveur X dans la configuration initiale)