26Fermer28
FarewellLe 18/03/2014 à 17:35
Un soft me dit ca :
Complete error log:

SMART Error Log Version: 1
ATA Error Count: 408 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 408 occurred at disk power-on lifetime: 17568 hours (732 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 80 ff ff ff 4f 00      00:28:12.251  READ FPDMA QUEUED
  60 00 20 ff ff ff 4f 00      00:28:12.251  READ FPDMA QUEUED
  60 00 60 ff ff ff 4f 00      00:28:12.230  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00      00:28:12.230  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00      00:28:12.205  READ FPDMA QUEUED

Error 407 occurred at disk power-on lifetime: 17568 hours (732 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 ff ff ff 4f 00      00:02:57.568  READ FPDMA QUEUED
  27 00 00 00 00 00 e0 00      00:02:57.564  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00      00:02:57.563  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      00:02:57.563  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      00:02:57.563  READ NATIVE MAX ADDRESS EXT

Error 406 occurred at disk power-on lifetime: 17568 hours (732 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 ff ff ff 4f 00      00:02:54.829  READ FPDMA QUEUED
  27 00 00 00 00 00 e0 00      00:02:54.825  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00      00:02:54.824  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      00:02:54.824  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      00:02:54.824  READ NATIVE MAX ADDRESS EXT

Error 405 occurred at disk power-on lifetime: 17568 hours (732 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 ff ff ff 4f 00      00:02:52.086  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00      00:02:52.076  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00      00:02:52.063  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00      00:02:52.063  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00      00:02:52.037  READ FPDMA QUEUED

Error 404 occurred at disk power-on lifetime: 17568 hours (732 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 ff ff ff 4f 00      00:02:38.361  READ FPDMA QUEUED
  27 00 00 00 00 00 e0 00      00:02:38.357  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00      00:02:38.356  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      00:02:38.356  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      00:02:38.356  READ NATIVE MAX ADDRESS EXT