1

http://www.gpx2.co.kr/data/data_firmware.asp?part=00
Tout frais, tout chaud (après des heures de "reload" sur firefox grin )
Je ne l'ai pas testé (noël n'est pas passé), ni téléchargé (pas inscrit sur le site de gph).

Traduit à l'arrache avec bablefish :

4th firmware installation guide

1. 4th firmware (version 1.1.0) improvement fact

Before firmware establishing it tries to read a lower part establishment method certainly, it wishes.

1) 2G SD card portion support
- From GP2x 2G SD card recognition
- With the SD card which is affixed a PC coat data in the GP2x copy possibility

Copying again with the PC the data which is had built-in in the SD card which only, from this time firmware is affixed in the GP2x. In order for also this portion to be possible inside speed governing about time.

2) battery use hour continuation
- To amend the war potential distribution at the hardware, machinery and tools deviation without eastern image 3 hours 15
In order for the minute drive to be possible.
(Test standard: Sanyo insect change of air 2500mA/ the rain Tray thu 800Kb/ is, phone use hour)

Firmware update to lead inside speed governing about time and the longest until 4 hours in order to extend, it is percentage plan.

3) T.V-out Utility (separate way utility)
- It will be able to transmit the eastern image screen with the T.V in order.
- The menu screen transmission and the game screen are not still embodied. As well
It is a drill plan to embody inside speed governing about time.
- The T.V-out there is to a setting menu it leads from 5th firmware and it is easy to the T.V
It will be able to connect in order, be percentage plan or currently from version with firmware together
It provides and after copying the mplayer_TV.gpu which it is giving in the SD card
When it executes the mplayer_TV from the Utility, the T.V-out function does to be embodied,
It is.


2 other patch facts
1) font fringe land of caption
Existing from small caption whole aspect font it amended with basic font.
It solved the problem where the Chinese character back of eastern image caption breaks.

2) location regulation and length limit of caption
Caption some the caption which passes over a problem and the screen which are leaning with the right
The case right and left will be salty and li ten it solved a problem.

3) the caption support where the color is included
The smi middle-school <font color= caption file "" > the tag it uses and the caption where the color is designated
Case it outputs with the color which is designated.

4) menu calling hour is small on upper right corner and the bug solution where the color square which rakes up remains
When afterwords calling one closing the menu, gets on upper right corner and the color square which rakes up
In order not to appear, it amended.

5) eastern image su khip middle menu calling hour it piles up with the stick and the problem which is output
Solution
When menu on the middle which su khip does an eastern image with right and left direction of the stick calling
Eastern image progress and the menu, overpressure ten the thing progress of the menu
In order to move, it amended.

6) it presses the stick, eastern image break function addition
Jae Saeng Joong (the condition which is not the menu) the case break function which will press the stick
It does.

--------------------------------------------------------------

3. Firmware establishment method

1) firmware file composition
- 4th firmware compression file (file life: 4th update.zip)
- Mplayer_tv.gpu (eastern image T.V output utility)


2) firmware establishment method
* Before firmware establishing the SD card from FAT32 mode format doing promotion
It gives.

* To firmware establishment hour 128M using the SD card above
Promotion it gives.

1phase: After making the new folder at the PC, 4th update.zip $$ln
The knock-down road it receives a file.

2 phases: 4th update.zip in the folder which the knock-down road receives a file
The mplyter_tv.gpu the knock-down road it receives a file.

3 phases: 4th update.zip Ji to compress a file it does. Compression
When the underground to do it is sour and with afterwords the same file creates.
(charset.tar/gp2xkernel.img/Ebookviewer / MusicPlayer/
Profile/Patch20051216.gpu/version /mplayer).

4 phases: The SD after inserting the card in the GP2x, from the Setting menu the USB
It selects and the PC and the GP2x are connected that it confirms.

5 phases: After Ji to compress the file which creates 8 thing and the Mplayer _tv.gpu file
It copies in the SD card which it inserts in the GP2x. (It was inserted in the GP2x
The SD it does not make the folder of separate way in the card and to drink it attaches that way,
Put in and)

6 phases: After confirming that the copy is over GP2x re-department thing.
(The father thing from the screen the message which is a Firmware Upgrading $$ln
It will be able to confirm.

7 phases: After selecting the Utility from 6 phased after menu screen,
It executesa Patch20051216 file. GP2x screen
It goes out and 2~3 second later again it comes to light. From reasoning
All Ub it means that the RAID process is over.

The kernel update and utility update all Firmware ver 1.1.0 is a possibility of seeing the indication which is from the loading screen which is completed and the Setting menu undergarment Info menu. Yoo thil li the version indication is not changed from the case info screen which will not execute the patch20051216 from the menu.



4. Eastern image T.V output utility execution method
* After until 7 phases accomplishing certainly first from firmware establishment 1 phase,
It executes the mplayer_tv.gpu it wishes.

1. The GP2X Yoo of the menu screen after the drive thil after selecting, the mplayer_tv
It executes. When wanting connecting with the T.V only only, when it is done.
(From firmware version 5 the Setting menu ` to select the T.V-out menu, the T.V
The out it is a plan which will embody a function.)

2. The Utility when it executes the mplyer_tv file which is to the menu eastern video file selection
It moves with the menu and when the eastern video file which is included in the SD_CARD it selects
The LCD goes out and there is a possibility the fact that the eastern image is output with the T.V screen.
(From firmware version 5 it selects the T.V-out of the Setting menu and simultaneously the T.V
It will lead and the possibility which it will see the menu in order to be.


Donc, en français :
- support des cartes SD de 2 Go
- avec des batteries Sanyo 2500 mA, la console fonctionne pendant 3h15
- Support de la sortie télé (avec un utilitaire)
- résolution d'un bug d'affichage avec des caractères chinois
- résolution d'autres bugs relatifs au textes affichés
avatar
Kupee pee

2

si ce nouveau firmware ne fait que ça, c'est plutot décevant...
c'est déjà super, c'est sur, mais j'attendais avec impatientce la possibilité de régler l'écran !
snif ! m'enfin attendons que quelqu'un l'upload et que les premiers opinions arrivent !
merci pour la news !
avatar
When The Dead Walk, The Living Run !

3

Parce qu'en plus la sortie télé ne fonctionnait pas avant... MDR. Ils se précipitent vraiment chez GPH...

4

il semblerait qu'il y ait aussi:
-Quelques correctifs avec l'écran.
-Support pour les sous-titres au format SMI en selectionnant la couleur.
-Correctifs de quelques bugs.

Il faudrait un gentil testeur pour nous dire si la maj se passe sans souci wink

5

deja, pouvoir le recuperer, car l'inscription sur le site officiel, bonjour les dega wink
avatar
pourquoi la mort ? parce qu'elle nous est si douce, au contraire de la vie :)

6

Moi j'espere juste qu'il ont réglé ce putain de clignotement de l'écran ! smile

7

avatar
pourquoi la mort ? parce qu'elle nous est si douce, au contraire de la vie :)

8

ils ont pas mi tout ce qu'ils avaient di dedans wink le control du contraste/brillance n'y est pas comme le controle du LCD donc pas d'amelioration flagrante je penes au niveau problemes d'affichage

9

Moi qui suis encore au 1.0, je peux essayer de passer directement au 1.1.0 ?

10

même question
avatar
(Lego Adventures)

Oh ! Yeah ...

11

mouais je ne vois pas trop l'interet de changer de firmware sauf si les utilisateurs ont besoin d'utiliser la carte sd 2go, ou le cable tv...
autant attendre la prochaine mise à jour !
avatar
When The Dead Walk, The Living Run !

12

c'est que je pense aussi, pour l'instant tout va bien, je ne vais pas tenter le diable...

13

Si ca corrige pas le problème de clignotement de l'écran, j'en vois pas l'interet non plus ...

14

Lagagafe :
Moi qui suis encore au 1.0, je peux essayer de passer directement au 1.1.0 ?

oui normalement c'est fait pour passe de n'imorte quel version vers cette version

15

certaines personne qui ont fait l'acualisation ont trouve que la console demarre legerement plus vite wink et bien sur la detection de la GP2x en USB fonctione bien mieu grin

16

J'ai été content dans un premier temps de voir débarquer rapidement des nouveaux firmware mais là ca commence à montrer réellement le manque de sérieux du constructeur.
D'une comme vous le dites si bien ca n'apporte pas grand chose, sauf susciter un nouvel interêt à la chose (ca me fait penser à la Star AC 5 tout d'un coup ... oublions le rapport) et deux ca va finir par devenir dangereux de flasher la GP2X ! Parce que je ne veux pas faire mon difficile, les correctifs arrivent certes, faut pas cracher dans la soupe mais si cela consiste à flasher sa Gepette tous les jours ou presque (et sachant le temps que ca va prendre à cette allure) d'un point de point purement statistique les risques de plantage dues à un flash va devenir important ! Moi j'attend un firmware qui déja dans un premier temps utilisera toutes les caractéristiques hardware cité par le constructeur et oui je ne suis pas préssé smile

17

Mise à jour réussi smile

par contre je n'ai remarqué aucun changement tongue toujours autant de scan lines et perso j'ai pas test L'USB car le cache est trop chiant a remettre en place après ^^ vive les card reader.

18

Bon, j'ai fait l'update, tout est ok, MAIS aucune différence, si ce n'est le nouveau numéro de version 1.1.0 ...super !
L'écran clignote encore et toujours les lignes verticales....
La gp2X ne démarre pas plus vite , contrairement a ce qui est dit
J'ai pas de carde de 2GO , donc pas testé cette fonction.
Idem pour la TV-OUT

Pour la batterie, c'est en test .....

Mais bon, a mon avis cette update c'est bien du flanc ! et le numéro de version aurai plutôt du être 1.02 !

19

Une méthode alternative de mise à jour de ce firmware a été publiée par Rob Brown.

Instructions:

1) (Optional, but recommended): Test the flash utility on your GP2X. Download this zip file (http://www.cobbleware.com/files/flashtest.zip) and unzip it on your computer. Copy the two files to the root directory of your SD card, and then run flashtest.gpe. It will write an image of the kernel to your NAND, but in the unused area of the NAND so if it fails, it will not make your GP2X unusable.

Note: when it says "Press Y to reboot", just turn your GP2X off, wait 10 seconds, and then turn it on again. Something in the register settings I've used for the flash program prevents the GP2X from booting successfully afterwards, unless it is switched off and on again.

If step 1 completed successfully, then proceed to actually updating your kernel:

2) Download this zip file (http://www.cobbleware.com/files/kernel1_1_0a.zip) and unzip it onto your computer. Copy the two files to the root directory of your SD card, and then run kernel1_1_0a.gpe. When this has completed, once again turn your GP2X off, leave it for 10 seconds, and then turn it on again.

When the update has been successful, the green GP2X booting screen will have a light-coloured border around the outside. That's about the only way I know of that you can tell the difference.

3) Run GPH's update. Get the Firmware 1.1.0 file from http://archive.gp2x.de/cgi-bin/cfiles.cgi?0,0,0,0,42, and unzip it onto your computer. Delete gp2xkernel.img and copy the rest of the files to your SD card. Run the patch20051216.gpu file.

All done! Your update is complete, and you can remove all of the above files from your GP2X. If you had a failure, try booting anyway, but if it doesn't work, you will need to follow DJWillis' unbricking guide.(http://www.distant-earth.com/gp2x/2005/11/howto-unbrick-most-bricked-gp2xs.html)

Encore une fois, je ne l'ai pas testée.... Plus qu'un jour avant d'avoir ma GP2X... grin Je prépare la carte SD!

Pour les améliorations du firmware, voilà ce qu'on peut lire sur le site gp2x.de :

Firmware 1.1.0
* SD Cards UP ton of 2 Gig
* Some LCD tweaks
* MoviePlayer fixed
* Included is A MoviePlayer for TV Out
* Faster SD Card r/w

Firmware 1.0.1
* better compatibility with SD cards
* less frame drops into movie playback with better SD READ performance
*. Battery light is off. (Future version wants have it on when low in battery)
* Ton traces play nose into movie more player fixed.
* 10 volume level into movie player and NO pausing when adjusting volume
* MP3 more player slowdown when changing EQ fixed.
avatar
Kupee pee

20

bon apres flashage

boot des fois plus rapide
compatibilite des video xvid (teste sur 6 fansub)

21

Flashage de mon côté aussi sans problème !
meilleur autonomie confirmé et surtout meilleur compatibilité xvid... des vidéos qui plantait avant fonctionne maintenant parfaitement. J'ai remarqué aussi un meilleur temps de chargement dans certain jeu grin

22

Donc finalement vous me conseillez quoi ? J'upgrade ou j'en reste a la 1.00 ?

23

moi je conseille l'upgrade ! tongue

24

Oki, je le fais de suite ! smile

25

Ca m'a l'air bon, si la led de la battery est éteinte c'est que ca a marché ?

26

Lagagafe :
Ca m'a l'air bon, si la led de la battery est éteinte c'est que ca a marché ?

le meilleur moyen c'est de le voire sur l'ecran de démmarage si il y a bien ecris la bonne version wink

27

Ok, donc c'est bon ! smile

Au fait, peut on effacer tous les fichiers qui ont servi a la maj apres ?

28

Lagagafe :

Au fait, peut on effacer tous les fichiers qui ont servi a la maj apres ?


oui

29

Question con: si j'achète une GP2X à partir d'aujourd'hui, qu'elle a le firmware 1.0, et que je ne possède qu'une SD Card de 2 Go, sera-t-il possible de flasher le nouveau firmware quand même ? Ou bien je dois me procurer une SD de 1 Go maxi (compatible firmware 1.0) pour flasher ?

30

si ta SD card est reconnu par la GP2x mais qu'elle n'accepte pas de faire la maj tu peux toujours utiliser le logicile Firmware 1.1.0 Updater dispo ICI mais par contr si tu veux utiliser une carte Sd de 2Go ca ne sera pas possible car cette carte n'estr pas reconnu par la GP2x avant le der ier firmeware